-
HIGH MANGANESE BLOW BAR
Blow bar is the main spare part of impact crusher. There are high manganese blow bar,high chrome blow bar. The material depends on the requirement of the crush material. If the material needs strong impact toughness, the high manganese blow bars are ideal selection. If we need high wear-resisting of blow bar, the chrome blow bar are our first choice. -
HIGH WEAR-RESISTANCE BLOW BAR
Shanvim provide Premium Replacement Parts for Metso and Sandvik Crushers. When it comes to Replacement Metso and Sandvik Crusher Parts, Shanvim has been OEM blow bar, abrasion resistance, long service time, fully-guaranteed . -
BLOW BAR-CASTING METAL
The main wearing parts of Impact Crusher are blow bars and impact plates, with special heat-treatment, the hardness of our blow bar can reach to HRC58~HRC63. The product mainly uses high manganese steel material, for example Mn14Cr2, Mn18Cr2, Mn22Cr2 and so on.
SHANVIM’s blow bars and impact plates are widely used on mining, construction, chemical, cement and metallurgical industry. Our impact parts have a service life 50~100% longer than those made of traditional high chromium iron.
-
HIGH CHROME BLOW BAR
The high chrome blow bar especially suit for hard rock crushing with high efficiency and energy saving, the discharge material size is smaller, and shape more equal. We can special produce according to requirement. (OEM produce)
-
BLOW BAR FOR CEMENT INDUSTRY
Shanvim’s blow bars and impact plates are widely used on mining, construction, chemical, cement and metallurgical industry. Our impact parts have a service life 50~100% longer than those made of traditional high chromium iron. -
BLOW BAR-IMPACT CRUSHER WEAR PARTS
Impact crusher is one of the widely used crushers. The parts of impact crusher are an important part of impact crusher and need to be replaced on schedule; It is also known as vulnerable parts of impact crusher in the industry. Shanvim can provide high quality wear-resistant parts for various types of impact crushers, such as impact breaking hammer, impact block, impact liner, sieve plate, check plate, etc. it can also manufacture products of different materials according to the drawings provided by customers. -
IMPACT CRUSHER WEAR SPARE PARTS-BLOWBAR-IMPACT BLOCK-LINER PLATE
Impact Crusher is a crushing machine that uses impact energy to crush materials. When the machine is working, motor drives the rotor rotates at a high speed. When the material enters the impact area of the blow bars, it hits and breaks with the blow bars on the rotor, and then it is thrown to the counterattack device which is called breaker plates and broken again, and then rebounds from the breaker plates. Return to the rotor action area to re-crush.
This process is repeated. The material enters the first, second, and third impact chambers from large to small, and is repeatedly crushed until it is crushed to the required size and discharged from the discharge port.
