• banner01

PRODUCTS

  • CHOCKY BARS WITH METAL CERAMIC

    CHOCKY BARS WITH METAL CERAMIC

    weldability wear-resistant bar/liner (Chocky Bar) is one of the highly alloyed chromium white iron wear parts and
    looks like chocolate. the composite layer hardness is harder than high Cr material 3-4 times,The mild steel backing
    plate has very good welding performance while bearing high impact.

  • GRATES FOR MINERAL PROCESSING

    GRATES FOR MINERAL PROCESSING

    Grates(single or double beam grate) that fit – and handle the uncertainties of shredding.
  • CHOCKY BAR-EASY TO USE

    CHOCKY BAR-EASY TO USE

    1.Product: Wearing spare parts for excavator buckets.
    2.Material: High Manganese steel and Carbon steel.
    3.OEM is welcome.
    4.Certification: ISO9001.
    This product is very easy to use. It's easy to be cut and welded on curved surface without pre-heat or after heat
    treatment. It's easy to be transported as it's very small. It's an ideal small area repairing wear part without too much
    welding time. We have a complete range of specification and are able to customize and develop according to
    customer's requirement. Comparing with normal High manganese steel wear resistant casting wear parts, this
    product's service life is 4-8 times longer.
  • HAMMER WITH WEARABLE STEEL

    HAMMER WITH WEARABLE STEEL

    Our hammers are made in austenitic manganese steel and proprietary low-alloy steel. SHANVIM also makes a differentially-hardened, low alloy steel hammer that is extremely hard on the bottom and possesses a softer material around the pin to keep the pin from wearing out. In essence, we are able to right-size the metallurgy of the casting to the particular application, resulting in the most wear-resistant part available.
  • CHOCKY BAR-EXCAVATOR PARTS

    CHOCKY BAR-EXCAVATOR PARTS

    SHANVIM chocky bars&wearing button are easy to cut and form onto inside and outside contoured surfaces. Users can calculate their own lay-outs and patterns depending on the area and shape of the parts that they want to protect. The notches in SHANVIM chocky bars&wearing button casting and/or backing plate assist in cutting them to size or bending them to shape to suit the application.
  • STEEL BALLS FOR BALL MILL AND ROD MILL

    STEEL BALLS FOR BALL MILL AND ROD MILL

    High Manganess Casting Material Chemical Composition Code Elem. C Mn Si Cr Mo P S ZGMn13-1 1.0-1.45 11.0-14.0 0.30-1.0 - - 0.09 0.04 ZGMn13-2 0.90-1.35 11.0-14.0 0.30-1.0 - - 0.09 0.04 ZGMn13-3 0.9-1.35 11.0-14.0 0.30-0.8 - - 0.09 0.04 ZGMn...
    40 60 80 100 120 high/medium/low chrome ball mill liners.
  • METAL & WASTE SHREDDER-SHANVIM WEAR PARTS

    METAL & WASTE SHREDDER-SHANVIM WEAR PARTS

    Metal & Waste Shredders are machines used for processing a wide range of metal scrap for reducing the size of scrap metals. Wear parts are essential to a shredder’s proper functioning.
  • HAMMER-METAL SHREDDER SPARE PARTS

    HAMMER-METAL SHREDDER SPARE PARTS

    Hammer crusher
    High chromium cast iron, high chromium alloy, high manganese steel, modified high manganese steel, ultra high manganese steel, modified high manganese steel, wear-resistant alloy steel, bimetal composite, composite material, high chromium material, ultra high chromium cast iron, multiple Alloy steel, high and low chromium cast iron, high quality high manganese steel