NEWS

SHANVIM Brings 30 Years of Wear Parts Expertise to WA Mining 2026 – Booth L128

Perth, Australia – September 16–17, 2026

SHANVIM, a premier Chinese manufacturer of mining wear parts with over three decades of foundry heritage, has confirmed its participation in the 15th WA Mining Conference and Exhibition, taking place at the Perth Convention and Exhibition Centre from September 16 to 17, 2026. The company will exhibit at Booth L128, showcasing its full spectrum of crushing and grinding wear components to one of the world’s most significant mining markets.

Western Australia’s premier mining event, WA Mining 2026 is expected to draw more than 5,500 industry professionals and over 155 exhibitors, building on the record-breaking success of the 2025 edition. The conference and exhibition serve as a vital hub for mine operators, procurement specialists, engineers, and technology innovators to connect, exchange insights, and forge commercial partnerships that drive the sector forward.

A Legacy Forged Over 30 Years
Established in 1991 in Jinhua, Zhejiang Province, SHANVIM has evolved from a regional foundry into a globally recognised supplier of high-performance wear-resistant components. With more than 30 years of uninterrupted operation, the company has accumulated deep metallurgical expertise, refined its casting processes, and built a reputation for delivering components that excel in the harshest crushing environments—from hard rock mining to aggregate processing and cement production.

SHANVIM’s extensive product portfolio covers virtually every critical wear point in the comminution circuit:

Jaw crusher wear parts – fixed and swing jaw plates engineered with optimised tooth profiles and available in Mn14%, Mn18%, and Mn22% high manganese steel grades

Cone crusher wear parts – mantles and bowl liners with advanced chamber configurations for consistent gradation and extended service intervals

Impact crusher wear parts – blow bars, impact plates, and hammers designed to withstand severe impact and abrasive conditions

Ball mill liners – lifter bars and shell plates engineered for maximum grinding efficiency and minimal liner wear

Supporting components – toggle plates, wedges, cheek plates, and all associated hardware for complete crusher maintenance solutions

The company’s metallurgical capabilities span ultra-high manganese steel, medium carbon alloy steel, and low, medium, and high chromium cast iron, enabling SHANVIM to tailor material selections to specific ore types, feed sizes, and operating conditions encountered across different mining operations.

Scale That Matters: 20,000+ Tonnes Annual Capacity
What truly distinguishes SHANVIM in the competitive wear parts landscape is its substantial manufacturing scale. The company operates an integrated production facility with an annual output exceeding 20,000 tonnes of finished wear components—a volume that underscores its capacity to serve large-scale mining operations, manage bulk orders, and maintain reliable inventory levels for long-term supply agreements.

This production capability is backed by state-of-the-art casting equipment, automated moulding lines, advanced heat treatment furnaces, and precision machining centres. Every component leaving the SHANVIM factory undergoes stringent quality control at each stage: from raw material spectrographic analysis and alloy formulation to casting, heat treatment, dimensional inspection, and hardness verification. The result is a consistently high-quality product that delivers predictable performance in the field.

Global Footprint: Serving 30+ Countries Worldwide
SHANVIM’s export reach is a testament to the trust it has earned from mining customers across the globe. The company currently exports to more than 30 countries, spanning North America, Europe, Africa, the Middle East, Southeast Asia, and the Oceania region. Major mining destinations include Australia, the United States, Canada, Chile, South Africa, Zambia, Indonesia, and the Philippines, among others.

Since commencing international exports in 2010, SHANVIM has steadily expanded its global footprint, establishing enduring partnerships with mining companies, equipment dealers, and aftermarket distributors. The company’s participation in leading industry events—including Mining Indonesia, bauma China, and now WA Mining in Australia—reflects its ongoing commitment to being present in key markets and building relationships that transcend transactional supply.

For Australian mining operators, SHANVIM brings a compelling value proposition: a reliable, high-volume supplier with a proven track record of serving demanding mining environments across multiple continents, combined with the flexibility to customise products for site-specific requirements.

Technical Excellence Through Metallurgical Science
SHANVIM’s competitive edge lies not merely in its production volume but in its scientific approach to wear part engineering. The company leverages advanced work-hardening principles in its high manganese steel products—under impact, the surface hardness increases from approximately 220 HB to over 550 HB while the core retains critical toughness to resist fracture. This metallurgical dynamic delivers extended wear life, reduced unplanned downtime, and a significantly lower cost per tonne processed.

In addition to conventional austenitic manganese steels, SHANVIM offers modified grades with enhanced wear resistance and improved dimensional stability, catering to customers seeking to optimise performance in specific crushing applications. The company’s engineering team works closely with customers to analyse wear patterns, identify failure mechanisms, and recommend optimal alloy selections and chamber configurations.

Why Western Australia Matters
Western Australia remains one of the world’s premier mining destinations, home to extensive iron ore, gold, lithium, nickel, and copper operations that collectively drive a substantial portion of global commodity supply. The state’s mining sector operates under some of the most rigorous performance standards, demanding supply chain partners who can deliver consistency, reliability, and technical support.

SHANVIM’s decision to exhibit at WA Mining 2026 reflects a strategic focus on the Australian market and a commitment to serving WA-based operators with premium wear solutions. The event provides an unparalleled opportunity to engage directly with site engineers, maintenance managers, procurement professionals, and mine operators who understand that the quality of consumable wear parts has a direct impact on production throughput and unit costs.

Positioned at the Intersection of Innovation
WA Mining 2026 features several dedicated zones that align with the industry’s evolving priorities. The Decarbonisation Zone highlights solutions for reducing emissions and optimising energy consumption across mining operations, while the newly introduced Transformative Tech Zone showcases practical applications of automation, artificial intelligence, and digital twins already delivering measurable results on active mine sites.

While SHANVIM’s core business remains physical metallurgy and precision casting, the company recognises the importance of data-driven maintenance strategies. By supplying wear parts with consistent metallurgical properties and predictable wear profiles, SHANVIM enables customers to better plan maintenance schedules, reduce unplanned stoppages, and integrate wear life data into their broader operational management systems.

A Trusted Partner for the Long Haul
SHANVIM’s relationships with international mining companies are built on more than product quality—they are founded on responsiveness, technical collaboration, and a genuine commitment to customer success. The company supports full customisation based on specific industrial and mining conditions, from adjusting alloy compositions to modifying chamber profiles for particular feed materials and crusher models.

The SHANVIM team at Booth L128 will include experienced technical professionals prepared to discuss application-specific challenges, review wear part performance data, and provide personalised recommendations for improving crushing circuit efficiency and reducing total operating costs.

Looking Forward
As the mining industry continues its relentless pursuit of operational excellence, the role of high-quality consumables becomes increasingly strategic. Inferior wear parts often lead to premature failure, unplanned downtime, and lost production—consequences that outweigh any initial price advantage. SHANVIM’s value proposition is clear: premium engineering, consistent quality, and reliable supply backed by 30 years of experience and an annual production capacity of over 20,000 tonnes.

The company extends a warm invitation to all WA Mining 2026 attendees to visit Booth L128, explore its comprehensive product range, and engage with its technical team to discover how SHANVIM can contribute to more efficient, cost-effective, and reliable crushing operations.

About SHANVIM

Zhejiang Jinhua Shanvim Industry and Trade Co., Ltd., founded in 1991, is a specialised wear-resistant parts casting manufacturer headquartered in Jinhua, Zhejiang Province, China. With an annual production capacity exceeding 20,000 tonnes and exports to more than 30 countries worldwide, the company produces a comprehensive range of wear components for jaw crushers, cone crushers, impact crushers, and ball mills, serving the mining, cement, aggregate, and infrastructure sectors. Backed by over three decades of continuous metallurgical innovation and precision manufacturing, SHANVIM delivers reliable, high-performance wear solutions that reduce downtime, optimise production costs, and enhance overall plant productivity.